Modern Gate Decoration Ideas in Kenya: Spear Heads, Balls, Castings and Plates

A modern gate in Kenya is more than a steel frame and sheet. The decorations are what make one gate stand out on the street. The good news is that most designs are built from a small set of parts. Once you know what each part does, you can plan a gate that looks good and is easy for your fundi to make.

The parts of a decorated gate

Five popular gate styles

1. Classic spear-top gate

Vertical bars topped with spear heads, a scroll arch and a cast centre piece. Use our L-Series castings for the arch and centre.

2. Checkered-plate privacy gate

A solid lower half in decorative checkered plate with bars or a CNC strip above. Private, strong and low maintenance.

3. Modern CNC gate

Full CNC laser-cut panels in a geometric or star pattern, often finished two-tone in grey and gold.

4. Grooved-sheet minimalist gate

Clean horizontal lines from grooved gate sheets, with little or no ornament. Popular on new builds and apartments.

5. Mixed classic-modern gate

Checkered plate below, bars with chillums and flowers in the middle, and spear heads on top. A good balance of privacy, light and decoration.

Planning tips

• Decide the style first, then count parts per panel and multiply by the number of panels.
• Order a few extra small pieces; it is cheaper than a second trip.
• For sliding gates, keep heavy decoration low so the gate stays balanced on its rollers and fit roller guides at the top.
• Plan the finish: powder coating lasts longer than paint on decorated gates.

Matching the gate to the house

A gate is the first thing people see, so it should match the building behind it:

• Maisonettes and bungalows with tiled roofs usually suit classic or mixed designs: castings, spear heads and a checkered lower half.
• Flat-roofed modern houses and townhouses suit grooved sheets or CNC panels with little ornament.
• Apartment blocks need a gate that is strong, easy to maintain and often automated: keep decoration simple and the gate light enough for the motor.
• Commercial premises often add the company name or logo in a custom CNC panel.

Security features worth including

Decoration and security can work together:

• Spear heads along the top discourage climbing.
• Avoid horizontal bars low down that act as a ladder; checkered plate or a CNC panel below removes footholds.
• Keep gaps between bars small enough that a hand cannot reach the lock from outside, or fit a lock box.
• Use strong hinges on swing gates, and roller guides on sliding gates so they cannot be lifted off the track.

Ordering checklist

1. Gate type (swing or sliding), width and height of each leaf, and the pedestrian door.
2. Style and a reference photo.
3. Decoration parts and quantities per panel.
4. Sheet or plate for infill, with thickness.
5. Hinges, roller guides, locks and, if needed, a gate motor.
6. Finish: paint or powder coating, and colours.

We supply fabricators, homeowners, contractors and dealers. Bring a photo of the gate you like to our Gikomba or Kariobangi branch, or send it on WhatsApp, and we will put together the parts list.